This proximity-sensing, no-touch paper towel dispenser dispenses a pre-set length of towels per cycle from an 8-inch standard towel roll up to 800 feet (244 meters) long. It can also use stub rolls for continuous dispensing. Powered by 4 D-size batteries (not included), it comes with a frame for semi-recessed mounting. When you place your hands in the sensor zone, the dispenser automatically dispenses one towel at a time until the supply runs out. You can set the towel length, delay, and economy mode using three three-position switches. It can switch to a full roll automatically after finishing a partial roll and works well with both full and stub rolls. To refill, just unlock the door and replace the towel roll. You need to replenish the supply and replace the batteries manually. An LED indicator shows the sensing and battery status. The locking door prevents unauthorized access and roll removal.
Using this paper towel dispenser is easy. First, make sure to insert 4 D-size batteries (not included). Then, you can mount it semi-recessedly using the included frame. When you want a towel, simply place your hands in the sensor zone, and it will dispense a pre-set length of towel for you. You can adjust the towel length, delay, and economy settings with the three switches. When the towel roll runs out, unlock the door and replace it with a new roll. If you have a partial roll left, you can transfer it to the stub roll position. Remember to check the LED indicator regularly to see the battery status. Replace the batteries when they are low. Also, keep the locking door locked to prevent others from taking the towel roll without permission. With proper use and maintenance, this dispenser will serve you well for a long time.
