This proximity - sensing no - touch paper towel dispenser offers a smart and hygienic solution. It dispenses a pre - set length of towels per cycle from an 8' standard towel roll up to 800 ft. (244m) long, and can handle stub rolls for non - stop dispensing. Powered by an internal low - voltage adapter (included), it works with 110 - 240V/AC, 50/60 Hz and outputs 5VDC @ 1A. When you place your hands in the sensor zone, the dispenser automatically gives out one length of towel at a time until the supply runs out. You can set the towel length, delay, and choose an economy mode using three three - position switches. It can switch from a partial roll to a full roll smoothly. Just unlock the door to refill the dispenser when the roll is empty or nearly empty. The supply is refilled manually. An LED shows the sensing and operation status. The locking door keeps unauthorized people from accessing or removing the roll.
Using this paper towel dispenser is a breeze. First, make sure it's connected to power with the provided adapter. You can use the three - position switches to set how long the towel should be, how long the delay is between each dispense, and choose an economy mode. When you need a towel, simply place your hands in the sensor zone, and it'll give you a pre - set length of towel. To refill, unlock the door and replace the towel roll. If you have a partial roll, move it to the stub roll position. Remember to keep the dispenser clean. Wipe it down regularly with a soft, dry cloth. Don't use abrasive cleaners as they might damage the unit. Make sure the power supply is within the 110 - 240V/AC, 50/60 Hz range. And always lock the door to prevent unauthorized access to the towel roll.
