Please note: Once production starts, ASI Piatto items can't be canceled or returned. Double - check your measurements before ordering. This sleek combo of paper towel dispenser and waste receptacle is designed to fit seamlessly into the washroom wall, with no part sticking out. The unique black phenolic door of the Piatto™ series adds a touch of elegance. The furniture - style hinges can be adjusted on - site for a perfect fit. All metal parts are crafted from Type 304 Stainless Steel, and all hardware, including the latch, is hidden, giving the Piatto Collection a minimalist look. The frame and cabinet are 20 - gauge. It fits into a finished wall opening with almost no gap. It can dispense 600 C - fold, 800 multi - fold, or 1,100 standard single - fold towels (with the provided adapter). The 9 - gallon (34 L) stainless steel waste receptacle has a rolled - edged finger hole for easy servicing. Paper towels are manually pulled out through the dispensing slot. An adjustable towel adapter ensures proper towel feeding until they're all used up. You can reload it with a partial load, and it'll keep working well. To refill, just unlatch the door and replace the towels. Finished Wall Opening (FWO): 17 - 5/16' x 54 - 1/16' x 6 - 11/16' (440 x 1373 x 170 mm) min. Unit Size: 17 - 1/4' x 54' x 6 - 9/16' (438 x 1372 x 166 mm). From the Tech Data: The Piatto™ Collection dispenser holds and dispenses different types of paper towels and has a 9 - gallon waste capacity. The frame and cabinet are 20 - gauge type 304 alloy 18 - 8 stainless steel with no exposed fasteners. The towel dispensing slot has a hemmed - in rolled edge for safe and snag - free dispensing. The flush - face door is 1/2' [13] thick black - edged Phenolic. It's attached with four concealed cabinet hinges and held closed by a spring - pin L - latch. All components are welded. The unit comes with OM & IG, an installation set - back gage, and depth stops. Install it in the wall recess using four self - threading Pan - Head screws. For ADA compliance, set the towel dispenser outlet 48' [1219] maximum above the finished floor. For general use, mount it 20' [508] above the floor. Check the OM & IG for full installation instructions. Towels feed automatically until they're gone. You can refill with a partial load. Replenish the dispenser and empty the waste container as needed for maintenance.
Using this paper towel dispenser and waste receptacle is easy. First, when installing, make sure to measure the wall opening correctly. The finished wall opening should be at least 17 - 5/16' x 54 - 1/16' x 6 - 11/16' (440 x 1373 x 170 mm). Use the four self - threading Pan - Head screws through the concealed mounting holes in the shim - less adjustable mounting tabs to mount it in the wall recess. If you want to comply with 2010 ADA Accessibility Standards, set the towel dispenser outlet no more than 48' [1219] above the finished floor. For regular use, you can mount it 20' [508] above the floor. When it comes to using the towels, they will feed themselves until the supply runs out. There's an adjustable adapter to make sure the towels come out smoothly. You can reload the dispenser even with a partial load of towels left, and it will keep working fine. To refill, just unlock the door and replace the towels. As for the waste receptacle, it has a 9 - gallon (34 L) capacity. Empty it when it gets full. Remember, once production of ASI Piatto items starts, you can't cancel or return them, so double - check your measurements before ordering. To keep the unit in good condition, clean the stainless - steel parts regularly with a mild cleaner. Check the hinges and latch from time to time to make sure they're working properly.
