The ASI 64696AC-6 Paper Towel Dispenser and Waste Receptacle features a modern and stylish look. It combines a paper towel dispenser and a waste bin in one convenient unit, helping to keep your commercial restrooms tidy. This semi-recessed unit needs a rough opening of 14-5/8 inches long, 39-3/4 inches high, and 3-1/4 inches deep. It can hold paper towel rolls that are 8 inches in diameter, 8 or 9 inches long, and 800 feet in length, along with a 4-inch diameter stub roll. Instead of a mechanical lever, it uses a touch-free proximity sensor powered by a low voltage adapter to dispense towels. The lower waste container has an 8.6-gallon capacity. Made of 18-gauge and 20-gauge stainless steel, it has an appealing No. 4 satin finish. A multi-staked, full-length piano hinge attaches the door to the cabinet. Both the towel dispenser and waste receptacle are secured with keyed tumbler locks to prevent theft and damage.
Using this product is easy. First, install it according to the size of the rough opening. Then, load the paper towel rolls into the dispenser. When you need a towel, just wave your hand near the touch-free proximity sensor, and a towel will be dispensed. The waste container below can hold used towels. Remember to empty the waste container regularly when it's almost full. To maintain the product, clean the stainless - steel surface with a mild cleaner to keep its shiny No. 4 satin finish. Make sure the keyed tumbler locks are always in good condition to prevent theft and vandalism. Also, check the low - voltage adapter that powers the proximity sensor to ensure it's working properly.
