The ASI 0481-HC is a top - notch solution for your commercial restroom needs. It combines toilet seat covers, toilet paper dispensers, and a sanitary napkin disposal bin, offering paper supplies and a waste receptacle for two stalls or compartments. For handicapped stalls, one side of the unit can be mounted flush to the wall to accommodate grab bar installation. This unit is designed to be mounted on partitions with a thickness ranging from 1/2 inch to 3 - 3/4 inches. It requires a rough opening that is 15 - 1/2 inches wide and 28 - 7/8 inches high. On each side of the partition, it holds 500 standard paper toilet seat covers and two rolls of standard or 1800 - sheet toilet paper, which is 4 - 1/2 inches wide and 5 - 1/4 inches in diameter. The built - in placarded napkin disposal receptacle can hold up to 1.3 gallons of trash. It is made of type - 304 stainless steel and comes with two tumbler locks for security. You can conveniently refill and service it from one side.
Using the ASI 0481 - HC is a breeze. First, make sure the partition you're mounting it on has the right thickness, between 1/2 inch and 3 - 3/4 inches. Then, cut a rough opening that's 15 - 1/2 inches wide and 28 - 7/8 inches high. Mount the unit as per the instructions, with one side flush to the wall if it's for a handicapped stall. When it comes to refilling, open the side with the tumbler locks. You can easily add 500 standard paper toilet seat covers and two rolls of toilet paper. For the napkin disposal bin, empty it when it's close to the 1.3 - gallon capacity. As for maintenance, regularly wipe down the stainless - steel surface with a mild cleaner to keep it looking good. Avoid using abrasive materials that could scratch the unit. Also, check the locks periodically to ensure they're working properly.
