The Bradley WBD1 WashBar Duo is a revolutionary one-piece unit that combines touch-free soap dispensing and water flow, offering a hygienic and efficient hand-washing solution. With advanced WashBar technology, it intuitively guides users through the hand-washing process and prevents simultaneous activations. It supports both foam and liquid soap, and comes fully equipped with supply hoses and soap dispenser components. This single-piece WashBar Duo enables users to access soap and water without leaving the hand-washing station, handling washroom traffic quickly and economically while providing personal space for each user. Load-tested to 500 pounds, it's securely attached to the basin with two anti-rotational shanks. Blue LED lights guide users to the WashBar Duo, indicating functions, and turn green when in use. Icons on the top surface clearly identify each function. The sensors have a 1 - 2 second turn-off delay for a smooth hand-washing and drying process and are not affected by skin tones or darkness. Smart technology makes it easy for facility managers or maintenance staff to clean and configure. The soap dispenser on the left side prevents soap from dripping on counters or the floor, reducing slip hazards and making cleaning a breeze. You can choose between foam or liquid soap, and it's compatible with most bulk soaps. The soap system can hold up to a 1-gallon container, minimizing the need for frequent replacements. When the LED above the soap function turns solid red, reset the soap counter, check the level, and replace the container if needed. It comes with an adapter for many 1-gallon soap containers on the market. The faucet on the right side has a spray angle of about 17 degrees off the vertical. It has a standard PCA silicone tip with non-aerated spray patterns of 0.5 gpm/1.90 Lpm, 0.09 gpc/0.35 Lpc or 0.35gpm/1.33 Lpm, 0.05 gpc/0.25 Lpc, and a maximum run time of 11 seconds per activation. It has an automatic 5-second purge within 24 hours of the last use, and the recommended operating range is 20 - 80 psi. Each WashBar Duo is powered by a 120V 2 A 12V DC adapter that plugs directly into an electrical outlet.
Using the Bradley WBD1 WashBar Duo is a breeze. Just place your hands under the corresponding sensor for soap or water, and the unit will activate automatically. The blue LED lights will guide you to the right function, and they'll turn green when the function is in use. When using the soap dispenser, if the LED above it turns solid red, first reset the soap counter. Then, check the soap level and replace the 1-gallon container with a full one if needed. The soap dispenser supports both foam and liquid soap, so you can choose according to your preference. For the faucet, the water will flow with a spray angle of about 17 degrees off the vertical. It has different flow rates and a maximum run time of 11 seconds per activation. There's also an automatic 5-second purge within 24 hours of the last use to keep the water fresh. Make sure the operating pressure is between 20 - 80 psi for the best performance. When it comes to maintenance, the smart technology in the WashBar Duo makes it easy for facility managers or maintenance staff to clean and configure. The soap dispenser on the left side is designed to prevent soap from dripping, which reduces slip hazards and makes cleaning easier. And the sensors are not affected by skin tones or darkness, so they'll work well for everyone. Just plug the 120V 2 A 12V DC adapter directly into an electrical outlet to power the unit.
