Product Description
This is an excellent bottle filling station suitable for both indoor and outdoor use. It is wall - mounted and fully ADA compliant. The operation is controlled by an electronic sensor. It has a single - level design with a cold water capacity of 8 gallons per hour. The compressor has 1/5 HP and a full - load current of 4A. With a width of 19 - 3/4 inches and a depth of 3.5 inches, it's compact. The inlet uses a 3/8 - inch tube O.D. It's made of stainless steel, has a voltage of 115, and uses refrigerant 134A (CFC - free). The water temperature is maintained at 50 degrees F. A regulator keeps a constant stream height at line pressures from 20 to 105 psi. The drain connection is 1 - 1/4 inches. It comes with a WaterSentry(R) Plus 3000 Gal Filter, an 8 GPH chiller, and a mounting frame. It has a 5 - year warranty on the refrigeration system and 1 - year on electrical components and the water system. It meets multiple standards including ADA, ASME A112.19.3/CSA B45.4, CAN/CSA 22.2 120, NSF 372, NSF 61, NSF 42, NSF 53, UL 399, ensuring compliance in accessibility, lead, water quality, electrical, and mechanical aspects.
Using this bottle filling station is easy. Just place your bottle under the electronic sensor, and it will start filling automatically. For best results, make sure the water pressure is between 20 and 105 psi. When it comes to maintenance, replace the WaterSentry(R) Plus 3000 Gal Filter regularly as recommended. Keep the station clean, especially the stainless - steel surface, using a mild cleaner. Check the electrical connections and the refrigeration system periodically. If you notice any issues with the water temperature or the filling operation, refer to the warranty details and contact the manufacturer. Remember, this station is designed for long - term use, so proper care will ensure its optimal performance.
