Halsey Taylor HTHB-HAC8BLPV-NF Platinum Electronic Sensor Water Cooler

This amazing water cooler comes with a bottle filling station and is suitable for both indoor and outdoor use. It has a wall - mounting type and is ADA compliant. The operation is controlled by an electronic sensor. It has two levels and can produce 8 gallons of cold water per hour. The compressor has a horsepower of 1/5 and a full - load current of 4A. Measuring 45 - 5/8 inches in height, 36 inches in width, and 18 - 5/8 inches in depth, it has a 3/8 - inch tube O.D. inlet. The cooler is colored platinum and runs on 115VAC. It uses 134A (CFC - free) refrigerant and can maintain a water temperature of 50 degrees F. The regulator ensures a constant stream height at line pressures from 20 to 105 psi. It has a 1 - 1/4 - inch drain connection and includes a strainer. The manufacturer offers a 5 - year warranty on the refrigeration system and a 1 - year warranty on electrical components and the water system. It meets ADA and ANSI/NSF 61 standards.

Using this water cooler is easy. First, make sure it's properly mounted on the wall. Then, connect the inlet tube and the drain connection. Plug it into a 115VAC power source. The electronic sensor will automatically control the operation. When you want to fill a bottle, just place it under the filling station. For best results, keep the water temperature around 50 degrees F. As for maintenance, check the strainer regularly and clean it if it gets clogged. Also, ensure the line pressure stays between 20 and 105 psi. If you have any issues with the refrigeration system, you're covered by a 5 - year warranty. For electrical components and the water system, the warranty lasts 1 year. Just follow these simple steps and you'll enjoy fresh, cold water for a long time.