Halsey Taylor Platinum Push Button Water Cooler, 3.0 gph -

This Halsey Taylor water cooler is a great choice for both indoor and outdoor use. It features a free-standing design and a push-button operation. It's not ADA compliant and has a single-level configuration. With a cold water capacity of 3 gallons per hour, a 1/10 HP compressor, and a full load amps of 2.5A, it's efficient. Standing at 37 inches in height, 12-1/4 inches in width and depth, it has a 3/8-inch tube O.D. inlet. The platinum color gives it an elegant look. Operating at 115VAC with a CFC-free 134A refrigerant, it can keep water at 50 degrees F. The regulator ensures a constant stream height at line pressures from 20 to 105 psi. It has a 1-1/4-inch drain connection. The manufacturer offers a 5-year warranty on the refrigeration system and 1-year on electrical components and the water system. It meets ANSI/NSF61, Section 9 standards.

Using this water cooler is easy. First, make sure it's properly connected to a power source with 115VAC and a water supply using the 3/8-inch tube O.D. inlet. Press the push button to get cold water at 50 degrees F. The regulator will keep the water stream at a good height. Remember, it's not ADA compliant. For maintenance, check the refrigerant system every once in a while. Since it has a 5-year warranty on the refrigeration system, if you notice any problems, contact the manufacturer. Also, clean the cooler regularly to keep it in good condition. The drain connection of 1-1/4 inches should be checked to ensure proper drainage. Keep in mind the line pressure should be between 20 and 105 psi for the regulator to work well. And always follow the electrical safety rules when using this product.