Easy Comply Vertical Extension - Telephone Lettering - 12 Length, ECVE-12-TEL

The Easy Comply Vertical Extension is crafted in line with the 2010 ADA Standards for Accessible Design Section 307.2 Protrusion Limits and NFPA - 101 4″ Projecting Object Rules. It can be easily mounted on various surfaces like walls and structural columns without the hassle of framing, patching, or painting. This extension enables objects that project more than 4″ from the mounting surface to meet multiple projecting object limitations. It offers a 4″ extension from 27″ off the floor up to the bottom of the target object. Its living hinge design allows it to rotate 90 degrees in either direction when bumped and then safely return to the center. Installation is a breeze. First, mark the mounting spot. Then, peel off the protective covering from the adhesive on the back. Press the extension firmly onto the surface. For a more secure fit, you can drill 4 holes and use 4 screws to attach it.

Using this Easy Comply Vertical Extension is simple. First, find the right spot on the wall or column where you want to mount it and mark it. Then, take off the protective cover from the adhesive on the back of the extension. Press it firmly onto the marked surface. If you want it to be extra secure, drill 4 holes and use the provided screws. When the extension gets bumped, don't worry. Thanks to its living hinge design, it will rotate 90 degrees in either direction and then come back to the center safely. As for maintenance, just use a soft, dry cloth to wipe it clean from time to time. Avoid using harsh chemicals as they might damage the extension or the adhesive. And remember, when mounting, make sure the surface is clean and dry for the best adhesion.