The ASI 3450-P is a high - quality horizontal grab bar. With a 1 - 1/4 - inch diameter, it offers a secure grip. The peened gripping surface adds to its safety. Measuring 24 inches by 36 inches, this grab bar is crafted from 18 - gauge stainless steel tubing. It has an appealing satin finish that not only reduces fingerprints but also gives it an eye - catching shine. At each end and the angle, there are 3 - inch diameter flanges made of type - 304, 11 - gauge stainless steel, herliarc welded firmly to the tubing. Inside each flange, there are three 7/32 - inch diameter countersunk, predrilled holes. These holes, placed about every 120 degrees, are designed to accept No. 10 self - tapping screws or oval head mounting screws (not included). After installation, the mounting hardware is fully visible. This grab bar meets or exceeds all ADA requirements, ensuring reliable performance and safety.
Using the ASI 3450 - P grab bar is simple. First, find a suitable location on the wall where you need support. Then, use the predrilled holes in the flanges to install it with No. 10 self - tapping screws or oval head mounting screws (you'll need to get these screws separately). Make sure to place the screws at the right intervals to ensure a secure fit. When using the grab bar, hold it firmly for support. As for maintenance, since it has a satin finish that resists fingerprints, you can simply wipe it with a damp cloth regularly. Avoid using abrasive cleaners as they might damage the finish. If you notice any loose parts or issues, check the mounting hardware and tighten the screws if necessary. This grab bar is built to last, but proper care will keep it in great condition for a long time.
