The ASI 3550-P is a top - notch horizontal grab bar. It has a 1 - 1/2 - inch diameter and a peened surface that offers a great grip. Sized at 24 inches by 36 inches, this grab bar is made from 18 - gauge stainless steel tubing. The tubing has an appealing satin finish, which not only reduces fingerprints but also gives it an eye - catching shine. At both ends and the angle of the unit, there are 3 - inch - diameter flanges. These flanges are crafted from type - 304, 11 - gauge stainless steel and are firmly herliarc welded to the tubing. Each flange has three 7/32 - inch - diameter countersunk, predrilled holes. These holes are designed to take No. 10 self - tapping screws or oval head mounting screws (not included), with one hole placed about every 120 degrees for a super - secure installation. Once installed, the mounting hardware stays fully visible. This grab bar meets or surpasses all ADA - established requirements for grab bars, ensuring safety and compliance.
Using the ASI 3550 - P grab bar is easy. First, find a suitable location on the wall where you need support. Then, use the predrilled holes in the flanges to attach the grab bar with the appropriate screws (not included). Make sure to place the screws evenly as the holes are spaced about every 120 degrees for a stable hold. When it comes to maintenance, simply wipe the grab bar with a soft, damp cloth to keep it clean. Avoid using abrasive cleaners as they may damage the satin finish. Also, check the mounting screws regularly to ensure they are tight. This will help the grab bar last longer and keep you safe at all times.
