36-Inch Grab Bars
- 36 inches (914mm) long and 1-1/4 inches (32mm) in diameter, made of 1-inch (25mm) zinc-plated tubing with an antimicrobial vinyl coating for durability and hygiene.
- The concealed mounting flange is crafted from polyamide 6 - fiberglass reinforced nylon with a shiny finish. It has screw holes for concealed anchors, ensuring a secure and discreet installation.
- The cover, also made of polyamide 6 - fiberglass reinforced nylon with a glossy finish, is 1/8 inch (3.2mm) thick and 3-1/4 inches (83mm) in diameter. It easily snaps over the mounting flange to hide the screws.
These grab bars are 36 inches (914mm) long and 1 1/4 inches (32mm) in diameter. They are constructed from 1-inch (25mm) zinc-plated tubing with an antimicrobial vinyl coating. The concealed mounting flange is made of polyamide 6 - fiberglass reinforced nylon with a shiny finish and has screw holes for concealed anchors. The cover, made of the same material, is 1/8 inch (3.2mm) thick and 3-1/4 inches (83mm) in diameter and snaps over the flange to conceal the screws.


Using this grab bar is easy. First, find a suitable location on a wall where you need support. Mark the spots for the concealed anchors according to the screw holes on the mounting flange. Drill holes and insert the anchors. Then, attach the mounting flange to the wall using the provided screws. Next, place the grab bar on the mounting flange and ensure it's properly aligned. Finally, snap the cover over the mounting flange to hide the screws. When using the grab bar, don't apply excessive force in one direction to avoid damage. For maintenance, simply wipe it with a mild soap and water solution regularly to keep the antimicrobial vinyl coating effective. Avoid using abrasive cleaners as they may scratch the finish.