Bobrick B-58616.99 (36 x 24 x 1.25) Commercial Grab Bar, 1-1/4 Diameter x 36 Length, Stainless Steel (Peened)

This commercial grab bar measures 24 inches wide by 36 inches deep (61 x 91cm), with a 1-1/4 inch diameter (32mm) and a peened finish. It's crafted from 18-gauge (1.2mm) type 304 stainless steel tubing with a satin finish. The concealed mounting flange, 1/8 inch (3mm) thick, is made of type 304 stainless steel plate, sized 2 inches wide by 3-1/8 inches high (50 x 80mm), and has screw holes for concealed anchors. The cover, 22-gauge (0.8mm) type 304 stainless steel with a satin finish, has a 3-1/4 inch (85mm) diameter and snaps over the mounting flange to hide the screws. This grab bar offers durability and a sleek look for commercial use.

Using this grab bar is easy. Just find a suitable location on a wall and use the concealed anchors through the screw holes in the mounting flange to install it securely. When using, hold the bar firmly to support your weight. As for maintenance, you can clean it with a mild soap and water solution. Wipe it dry with a soft cloth to prevent water spots. Avoid using abrasive cleaners or tools as they may damage the peened and satin finishes. Also, regularly check the mounting to make sure it remains tight and secure over time.