The ASI 0714 Commercial Coat and Bumper Hook is crafted from heavy-duty chrome-plated brass, offering durability and a sleek look. It's surface-mounted and serves a dual purpose. In a commercial bathroom stall, it provides a storage hook and also prevents dents and scrapes on the partition or wall with just one accessory. The hook is positioned below the bumper arm. When the door is open, it's out of sight, and becomes accessible once the door is closed. The bumper arm extends 3 inches from the mounting surface and has a black neoprene rubber tip. The mounting plate has four 3/16-inch diameter countersunk holes. The necessary mounting hardware includes two No. 10 screws, which you'll need to buy separately.
Using this ASI 0714 Commercial Coat and Bumper Hook is easy. First, make sure you have the two No. 10 screws (you'll need to buy them separately). Then, find a suitable place on the bathroom stall partition or wall to mount it. Line up the mounting plate with the surface and use the screws to secure it. When the door is open, the hook stays out of the way. When you step inside and close the door, the hook is right there for you to hang your coat or other items. As for maintenance, you can simply wipe it down with a clean, dry cloth from time to time to keep it looking good. Be careful not to use any abrasive cleaners as they might damage the chrome finish. Also, check the screws occasionally to make sure they're tight and the hook is securely attached.
