Experience the convenience of touchless operation! This sleek stainless - steel liquid soap and gel hand sanitizer dispenser, finished in elegant matte black, is a game - changer. When the sensor beneath the dispenser gets activated, a battery - powered mechanism automatically dispenses a single shot of liquid soap or gel hand sanitizer. It comes with a tamper - resistant viewing window, allowing you to easily monitor the refill level. You have the flexibility to either mount it on the wall or use an additional mobile stand (ASI Part # FS - 0300). The dispenser has a capacity of 27 ounces (800 ml) when using the provided refillable soap or gel hand sanitizer cartridge. It runs on 6 AA - size batteries (not included). To ensure proper usage, make sure to use soap or gel hand sanitizer with a viscosity and pH within the specified ranges. The liquid soap viscosity should be between 100 and 5000 mPa·s (or cP), the gel hand sanitizer viscosity should be between 3500 and 23000 mPa·s (or cP), and the pH range should be 5.5 to 8.5.
Using this dispenser is a breeze. First, insert 6 AA - size batteries into the unit (batteries are not included). Then, fill the refillable cartridge with liquid soap or gel hand sanitizer that meets the viscosity and pH requirements. Once the cartridge is in place, you can choose to mount the dispenser on a wall or use the optional mobile stand. To get your dose of soap or sanitizer, simply place your hand under the dispenser, and the sensor will detect it, triggering the automatic dispensing. Remember to only use soap or sanitizer within the specified viscosity and pH ranges to avoid any issues. For maintenance, check the battery level regularly and replace the batteries when they run low. Also, clean the exterior of the dispenser with a soft, damp cloth from time to time to keep it looking good. And use the tamper - resistant viewing window to know when it's time to refill the cartridge.
