The Bobrick B-270 is part of the Contura Series, a top - notch choice for commercial restrooms. It features a sleek satin - finish stainless steel body, which not only looks great but also offers durability. With a capacity of 1 gallon (48.3 - L), it can hold a good amount of waste. The unit measures 15 1/8" W, 23" H, and 8 1/2" D (385 x 585 x 215mm). The top edges are hemmed, and the bottom of the waste receptacle has a recessed finger grip for safe and easy handling. The waste receptacle is made of 18 - 8, type - 304, 20 - gauge (1.0mm) stainless steel with all - welded construction. Its front has the same arc as other Bobrick Contura Series washroom accessories, and the side edges' radius complements the rest of the series. Stainless steel reinforcement straps on the back strengthen the four mounting screw holes. It comes with a LinerMate Trash Liner Holder. This LinerMate has a molded plastic sleeve and a 20 - gauge (1.0mm) stainless steel, U - shaped support strap with a hemmed edge for safety and is riveted together. It makes it a breeze to install and remove disposable trash liners and keeps the liner inside the waste receptacle. When the unit is properly mounted, there's space between the bottom of the waste receptacle and the floor, which helps with floor cleaning.
Using your Bobrick B - 270 is easy. To insert a disposable trash liner, lift the LinerMate up and forward, then rest it over the edge of the waste receptacle front panel with the bottom notches engaged on the top front edge of the receptacle. Place the disposable trash liner inside the LinerMate and fold it over the LinerMate sleeve. Tie a knot in the corner of the bag, then put the LinerMate with the liner back into the receptacle. When it's time to empty, just gather the liner from the LinerMate sleeve and lift the bag up. When installing, mount the unit on the wall with four sheet - metal screws (not included) at the points marked by an S. For plaster or dry wall, use concealed backing to meet local building codes. For other wall surfaces, you can use fiber plugs, expansion shields, 1/8" (3mm) toggle bolts, or expansion bolts. As for maintenance, regularly wipe the stainless steel surface with a mild cleaner to keep its satin finish looking great. Also, check the LinerMate for any signs of wear and tear and replace it if necessary.
