The Bobrick B-221 is part of the Classic Series. It features a sleek satin-finish stainless steel body, made from 18-8, type-304, 22-gauge (0.8mm) stainless steel with an all-welded construction and a beveled opening. This dispenser can hold up to 500 single or half-fold toilet seat covers. It's designed to be filled from the bottom through a concealed opening. Measuring 15.75' W, 11' H, 2' D (400 x 280 x 50mm), it requires a minimum of 5' (125mm) clearance from the bottom of the dispenser to the top of any horizontal projection for easy filling. To install, mount it on a wall or toilet partition using two flat-head screws (not provided). For plaster or drywall, use concealed backing; for other surfaces, fiber plugs, expansion shields, 1/8'' (3mm) toggle bolts, or expansion bolts can be used.
Using the Bobrick B-221 toilet seat cover dispenser is a breeze. First, make sure there's at least 5 inches (125mm) of clearance below the dispenser. To fill it, simply access the concealed opening at the bottom and load up to 500 single or half-fold toilet seat covers. When you need a seat cover, it dispenses from the beveled opening. For installation, you'll need to use flat-head screws (not included). Mount it on a wall or toilet partition at the points marked with an 'S'. If you're using plaster or drywall, add concealed backing that meets local building codes. For other wall surfaces, use fiber plugs, expansion shields, 1/8 - inch (3mm) toggle bolts, or expansion bolts. To keep it in top shape, regularly wipe the satin - finish stainless - steel body with a soft, damp cloth. Avoid using abrasive cleaners that could scratch the surface.
