The Bobrick B - 2888 belongs to the classic series, a high - quality choice for commercial restrooms. It features a satin - finish stainless steel unit paired with a stainless steel dispensing mechanism, offering durability and a sleek look. The door has a flat face and a protruding tumbler lock, adding security. This dispenser can hold two standard toilet paper rolls up to 5 - 1/4' (135mm) in diameter, with each roll having up to 1800 sheets. When the bottom roll is used up, the extra roll automatically drops into place, ensuring continuous supply. It comes with theft - resistant, heavy - duty spindles for added protection. The unit measures 6.06' x 11' x 5.94' (155 x 280 x 150mm). The cabinet is made of 18 - 8, type - 304, 22 - gauge (0.8mm) stainless steel with all - welded construction and a satin finish on exposed surfaces. The door is also made of similar stainless steel with an 18 - gauge (1.2mm) stainless steel door frame, and its front is a one - piece, seamless construction. The dispensing mechanism, inner housing, and cam are crafted from 18 - 8, type - 304, 18 - gauge (1.2mm) stainless steel, while the two spindles are heavy - duty, one - piece, molded ABS. This dispenser is designed to provide reliable service in various commercial settings.
Using the Bobrick B - 2888 toilet paper dispenser is easy. First, unlock the door with the provided key. Load two standard - core toilet tissue rolls up to 5 - 1/4' (133mm) in diameter into the dispensing mechanism. Close and lock the door. As you use the toilet paper, when the bottom roll runs out, the extra roll will automatically drop into place. When it's time to replace the rolls, unlock the door again. For installation, if you have a partition with particleboard or other solid core, you can secure the dispenser with four #10 x 5/8' (4.8 x 16mm) sheet - metal screws (not included) at the points marked with an S. Or you can use through - bolts, nuts, and washers. For hollow - core metal partitions, you need to provide a solid backing. If installing two units back - to - back, use threaded sleeves and machine screws. For plaster or dry wall, make sure to have a concealed backing that meets local building codes. For other wall surfaces, you can use fiber plugs, expansion shields, 3/16' (5mm) toggle bolts, or expansion bolts. To maintain the dispenser, regularly clean the stainless steel surface with a mild cleaner to keep its satin finish looking great. Check the spindles and dispensing mechanism for any signs of wear or damage. Keep the key in a safe place to ensure security.
