Elkay 1/2 HP Remote Water Chiller, 2.0 GPH, 17-1/2H x 13-1

This remote water chiller offers a flow rate of 2.5 GPH and is powered by a 1/5 HP compressor. It has a full - load amps of 2.5 and a reserve of 0.25 gallons. Measuring 15.75 inches in height, 13.5 inches in width, and 10.5 inches in depth, it connects with 1/4' O.D. tubing. Operating at 115 volts, it uses CFC - free HFC134A refrigerant, making it an eco - friendly choice for cooling water.

Using this water chiller is easy. First, make sure it's connected to a 115 - volt power source. Then, connect the 1/4' O.D. tubing for the water flow. Once it's set up, it'll start cooling water at a rate of 2.5 GPH. When using, keep in mind that the compressor is 1/5 HP, so don't overload it. For maintenance, check the refrigerant level regularly. Since it uses HFC134A refrigerant which is CFC - free, it's environmentally friendly but still needs proper care. Also, clean the exterior of the chiller from time to time to ensure good performance. Don't place it in a very hot or humid environment as it may affect its operation.