Please note: once production starts, ASI Piatto items can't be canceled or returned. Double - check your measurements before ordering. This elegant automatic paper towel dispenser and waste receptacle is designed to fit seamlessly into the washroom wall. The phenolic door is attached to the cabinet with field - adjustable, high - quality furniture hinges and locked by an internal spring - loaded latch. All hardware is hidden, giving the Piatto Collection a sleek, minimalist look. The proximity - sensing no - touch unit can hold and dispense one standard 8 - inch diameter (Ø203) x 8 - inch wide (203) towel roll up to 800 ft. (244m) long and one 8 - inch wide (203) stub roll up to 4 - inch diameter (Ø102). It automatically switches to the main roll after using the stub roll when the feed tabs are set correctly. Powered by 4 D - size batteries (not included), it activates towel dispensing when hands are in the sensor zone. You can set the length, delay, and paper saver switches to choose the towel length. The waste receptacle has a 9.9 - gallon (37.3 L) capacity and needs to be emptied manually. Finished Wall Opening (FWO): 16 - 1/8" x 41 - 5/16" x 10" (410 x 1049 x 254 mm) min. Unit Size: 16 - 1/16" x 41 - 1/4" x 9 - 11/16" (408 x 1048 x 246 mm).
Using this paper towel dispenser is easy. First, make sure to install 4 D - size batteries (not supplied) into the dispenser. When you place your hands in the sensor zone, it will automatically dispense a length of towel. You can set the length, delay, and paper saver switches according to your needs. When it comes to the towel rolls, load one standard 8 - inch diameter x 8 - inch wide roll and one 8 - inch wide stub roll. Ensure the feed tabs are properly engaged so it can switch to the main roll after using the stub roll. For the waste receptacle, since it has a 9.9 - gallon capacity, you'll need to empty it manually when it's full. Remember, once production of ASI Piatto items starts, they can't be canceled or returned. So double - check your wall measurements before ordering. To keep the dispenser in good condition, regularly clean the sensor area and the cabinet. Also, replace the batteries when the dispenser's performance starts to decline.
