ASI 64696AC-00 Piatto Recessed Automatic Roll Paper Towel Dispenser (AC Plug-In), White Phenolic Door, 16-1/16 x 41-1/4 x 9-11/16

Please note: ASI Piatto items can't be canceled or returned once in production. Double - check your measurements before ordering. This elegant automatic paper towel dispenser and waste receptacle is designed to fit flush into the washroom wall, showing off the seamless design of Piatto. The phenolic door is attached to the cabinet with field - adjustable, high - quality furniture hinges and is kept shut by an internal spring - loaded latch. All hardware is hidden, giving the Piatto Collection a minimalist look. The proximity - sensing no - touch unit can hold and dispense one 8 - inch diameter [Ø203] x 8 - inch wide [203] standard towel roll up to 800 ft. (244m) long and one 8 - inch wide [203] stub roll up to 4 - inch diameter [Ø102]. It automatically switches to the main roll when the stub roll is used up if the feed tabs are properly set. Powered by an AC plug - in adapter with a C - UL - US and CE approved internal low - voltage adapter (included), using 110 - 240VAC, 50/60 Hz and outputting 5VDC @ 1A, it activates towel dispensing automatically when hands are in the sensor zone. The owner can set the length, delay, and paper saver switches to control the length of towel dispensed each time. The waste receptacle has a 9.9 - gallon (37.3 L) capacity and needs to be emptied manually. Finished Wall Opening (FWO): 16 - 1/8" x 41 - 5/16" x 10" (410 x 1049 x 254 mm) min. Unit Size: 16 - 1/16" x 41 - 1/4" x 9 - 11/16" (408 x 1048 x 246 mm).

Using this paper towel dispenser is easy. Just place your hands in the sensor zone, and it'll automatically dispense a length of towel according to the settings you've made. When it comes to the towel rolls, make sure to properly engage the feed tabs so that the dispenser can switch from the stub roll to the main roll smoothly. Remember, once production starts, you can't cancel or return the product, so double - check your measurements before you order. For maintenance, the waste receptacle needs to be emptied manually when it's full. The dispenser is powered by an AC plug - in adapter, so keep it connected to a proper power source with the right voltage (110 - 240VAC, 50/60 Hz). If you want to change the length of the towel dispensed each time, you can set the length, delay, and paper saver switches.