Bobrick B-43949 Combination Commercial Paper Towel Dispenser/Waste Receptacle, Surface-Mounted, Stainless Steel

The Bobrick B-43949 is part of the stylish Contura Series. This unit comes equipped with TowelMate and LinerMate for efficient towel dispensing and waste management. Its satin-finish stainless steel construction offers a sleek look and durability. The radius on the corners and edges of the flange, door, and waste receptacle perfectly complements other Bobrick Contura Series washroom accessories. It features a flush tumbler lock for security. The paper towel dispenser can hold 600 C-fold or 800 multi-fold towels. The waste receptacle has a 15 - gallon (56.8 - liter) capacity and extends 9 1/8 inches (230mm) from the wall. It has a removable front panel for easy cleaning and a skirt for surface - mounting. The cabinet, skirt, flange, door, paper towel dispenser, and waste receptacle are all made of high - quality 18 - 8, type - 304 stainless steel. The paper towel dispenser has a 90° return towel guide angle and a Nylon Rod in the towel tray to dispense towels one at a time. The LinerMate trash liner holder makes it easy to install and remove disposable trash liners. This surface - mounted unit is a great addition to any commercial washroom, offering functionality and style.

Using this product is easy. First, load the paper towels in the towel tray. Then, pull one sheet of paper towel over the TowelMate towel rod and out to start the dispense. The paper towel dispenser can dispense C - fold or multi - fold paper towels without any adjustment. To insert a disposable trash liner, lift the LinerMate bag holder up and forward, rest it over the edge of the waste receptacle front panel, place the liner inside the LinerMate, and fold it over the sleeve. Tie a knot in the corner of the liner and put the LinerMate back into the receptacle. When it's time to empty, just gather the liner from the LinerMate and lift the bag up. For cleaning, you can easily remove the front panel of the waste receptacle. When installing, mount the unit on the wall using #8 x 1 - 1/4 inches (4.2 x 32mm) sheet - metal screws. Make sure to follow local building codes. For plaster or dry wall, use concealed backing. For other wall surfaces, fiber plugs, expansion shields, toggle bolts, or expansion bolts can be used. If the unit projects above the top of the wainscot, fill the gap with an aluminum channel or other filler. To keep your product in good condition, regularly clean the stainless - steel surfaces with a mild cleaner. Check the locks and hinges periodically for proper operation.