The ASI 04813-HC Toilet Paper Dispenser with Napkin Disposal Bin is an excellent solution for commercial restrooms. It allows you to provide paper supplies and a waste receptacle in two stalls or compartments. For handicapped stalls, one side of the unit can be mounted flush to the wall for grab bar installation. It's designed to be mounted in partitions with a thickness ranging from 1/2 inch to 3-3/4 inches, and requires a rough opening of 15-1/2 inches wide by 18-1/4 inches high. On each side of the partition, it holds two rolls of standard or 1800-sheet toilet paper, which are 4-1/2 inches wide and 5-1/4 inches in diameter. There's also a labeled napkin disposal bin that can hold up to 1.3 gallons of trash. The unit is made of type-304 stainless steel and features a tumbler lock for security. You can refill and service it from one side, adding to its convenience. All exposed surfaces have a nice satin finish to reduce fingerprints.
Using this ASI 04813-HC dispenser is easy. First, make sure it's properly mounted on the partition in your commercial restroom. To install the toilet paper rolls, open the unit from the service side and place the standard or 1800-sheet rolls inside. For the napkin disposal, just open the bin and throw in the used napkins. When the trash bin is full, empty it through the service side. As for maintenance, regularly check the tumbler lock to ensure it's working properly. Wipe the satin - finished surfaces with a soft cloth to keep them clean and reduce fingerprints. Avoid using abrasive cleaners as they may damage the stainless - steel finish. If you need to refill the toilet paper, always use rolls that are 4 - 1/2 inches wide and 5 - 1/4 inches in diameter for a perfect fit.
