Product Description
This water cooler is suitable for indoor, outdoor, or both. It has a wall - mounting type and is ADA compliant. Operated by an electronic sensor, it has a single - level design. With a cold water capacity of 8 gallons per hour, it's powered by a 1/4 HP compressor with 4A full - load amps. Measuring 19 - 13/16 inches in height, 18 - 3/8 inches in width, and 19 inches in depth, it has a 3/8 - inch tube O.D. inlet. The light gray granite color gives it an elegant look. Running on 115 volts and using CFC - free R134A refrigerant, it maintains water at 50°F. The regulator ensures a constant stream height at line pressures from 20 to 105 psi. It comes with a 1 - 1/4 - inch drain connection, a WaterSentry(R) 1500 Gal Filter, and a visual filter monitor with LED status indicators. It has a 5 - year warranty on the refrigeration system and 1 - year on electrical components and the water system. It meets multiple standards like ADA, ASME A112.19.3/CSA B45.4, and more, ensuring compliance in accessibility, lead, water quality, electrical, and mechanical aspects.
Using this water cooler is easy. First, make sure it's properly mounted on the wall and connected to the water and power sources. Plug it into a 115 - volt outlet and connect the water inlet and drain. The electronic sensor will detect when you need water, so just place your cup under the spout. The filter will keep your water clean, but remember to check the LED filter status indicators regularly. If the indicators show it's time to replace the filter, follow the instructions to install a new WaterSentry(R) 1500 Gal Filter. When it comes to maintenance, keep the cooler clean by wiping it with a soft, damp cloth. Avoid using abrasive cleaners. Also, make sure the surrounding area is well - ventilated to help the compressor work efficiently. If you have any problems, refer to the manufacturer's warranty information. The refrigeration system is covered for 5 years, and electrical components and the water system are covered for 1 year.
