ASI 3401-18P (18 x 1.25) Commercial Grab Bar, 1-1/4 Diameter x 18 Length, Exposed-Mounted, Stainless Steel (Peened)

The ASI 3401-18P is a top - notch straight grab bar. It has a 1 - 1/4 - inch diameter and is 18 inches long. Its peened surface provides a great non - slip grip. Crafted from 18 - gauge stainless steel tubing, it has an appealing satin finish that reduces fingerprints while still looking shiny. At each end, there's a 3 - inch diameter flange made of type - 304 stainless steel, herliarc welded firmly to the tubing. Inside each flange, there are three 7/32 - inch diameter countersunk, predrilled holes, set about every 120 degrees. These holes can take No. 10 self - tapping screws or oval head mounting screws (not included). After installation, the mounting hardware is fully visible. This grab bar meets or exceeds all ADA requirements for grab bars.

Using the ASI 3401 - 18P grab bar is easy. First, find a suitable location on a wall. Then, use No. 10 self - tapping screws or oval head mounting screws (you'll need to buy these separately) to attach the bar through the predrilled holes in the flanges. Make sure the bar is firmly fixed. When using it, hold on tightly to the non - slip surface. As for maintenance, just wipe it with a soft cloth regularly. Avoid using abrasive cleaners as they can damage the satin finish. Check the screws every once in a while to ensure they're still tight. This grab bar is designed to meet ADA standards, so you can use it with confidence for better support and safety.