ASI 3401-42 (42 x 1.25) Commercial Grab Bar, 1-1/4 Diameter x 42 Length, Exposed-Mounted, Stainless Steel

42-Inch Grab Bar

• Straight Design
• Exposed Flange - 3 Inches in Diameter, 1/8 Inch [3] Thick
• Type 304 Stainless Steel with Satin Finish
• Surface Mounted
• 1-1/4 Inch Outside Diameter Bar
• 42-Inch Length

The ASI 3401-42 is a top - notch straight grab bar. Measuring 1-1/4 inches in diameter and 42 inches long, it has a smooth and sleek look. Crafted from 18 - gauge stainless steel tubing, the grab bar features an eye - catching satin finish. This finish not only reduces fingerprints but also gives it an appealing shine. At both ends of the bar, there are 3 - inch diameter flanges made of type - 304 stainless steel, securely welded to the tubing. Each flange has three 7/32 - inch diameter countersunk, predrilled holes. These holes are designed to accept No. 10 self - tapping screws or oval head mounting screws (not included), with one hole placed every 120 degrees for a super - secure installation. Once mounted, the hardware is fully visible. This grab bar meets or exceeds all ADA requirements for grab bars, making it a reliable choice for safety.

Using this grab bar is simple. First, choose a suitable location on a wall or other stable surface. Then, align the predrilled holes on the flanges with the spots where you want to install it. Insert the appropriate screws (you'll need to get No. 10 self - tapping screws or oval head mounting screws on your own) into the holes and tighten them securely. When using the grab bar, hold it firmly for support. For maintenance, use a mild soap and a soft cloth to clean the grab bar regularly. This will keep the satin finish looking great and help prevent dirt buildup. Avoid using abrasive cleaners as they can scratch the surface. Also, check the screws periodically to make sure they're still tight. If you notice any signs of damage or looseness, address the issue right away to ensure the grab bar remains safe to use.