ASI 3556 (54 x 36 x 1.5) Commercial Grab Bar, 1-1/2 Diameter x 36 Length, Exposed-Mounted, Stainless Steel

The ASI 3556 is a top - notch horizontal grab bar. It has a diameter of 1.5 inches and a smooth, attractive satin finish that not only reduces fingerprints but also gives it a lovely shine. Measuring 54 inches by 36 inches, this grab bar is crafted from 18 - gauge stainless steel tubing. At each end and the angle, there's a 3 - inch diameter flange made from type - 304, 11 - gauge stainless steel, herliarc welded securely to the tubing. Inside each flange, there are three 7/32 - inch diameter countersunk, predrilled holes. Positioned about every 120 degrees, these holes are designed to accept No. 10 self - tapping screws or oval head mounting screws (not included). Once installed, the mounting hardware stays fully exposed. This grab bar meets or surpasses all ADA requirements for grab bars.

Using the ASI 3556 grab bar is easy. First, gather your No. 10 self - tapping screws or oval head mounting screws (not included). Find a suitable location on the wall and align the grab bar with the holes in the flanges. Insert the screws through the predrilled holes and tighten them to secure the grab bar in place. Remember, the mounting hardware will be exposed. As for maintenance, simply wipe the grab bar with a soft, damp cloth to keep its satin finish looking great. Avoid using abrasive cleaners as they may damage the surface. Also, check the screws periodically to make sure they're still tight. This grab bar is built to meet or exceed ADA requirements, so you can rely on its safety and durability.