The ASI 0719 Door Bumper is a smart solution for your bathroom stalls. It stops doors from hitting and rubbing against partitions, preventing dents and excessive wear. This extends the life of your partitions, keeping them in great condition. It can be easily mounted on any hard - surface partition through two 1/4 - inch diameter countersunk holes, spaced 1 - 5/8 inches apart. The manufacturer includes two No. 10 self - tapping screws for installation. Made from rust - proof Zamak, the bumper has three layers of chrome plating, giving it a smooth and shiny look. There's a black neoprene bumper at the end to absorb the shock when the door hits it. Once installed, the mounting flange, which is 2 - 3/16 inches in diameter and 3/32 of an inch thick, allows the bumper to extend 1 - 7/8 inches from the wall.
Using the ASI 0719 Door Bumper is easy. First, find the right spot on your bathroom stall partition where the door hits. Then, use the two included No. 10 self - tapping screws to mount the bumper through the 1/4 - inch diameter countersunk holes. Make sure the holes are spaced 1 - 5/8 inches apart. When installing, ensure the bumper is level for best results. As for maintenance, simply wipe it down with a soft cloth regularly to keep its chrome finish shiny. Since it's made of rust - proof Zamak, you don't have to worry about rust. But avoid using harsh chemicals on the black neoprene part as it might damage it. Keep an eye on the neoprene bumper over time; if it shows excessive wear, you might need to replace it.
