The Bobrick Fino Collection presents this outstanding coat hook. It features a height of 1 - 1/2 inches (38mm), a depth of 3 inches (75.5mm), and a width of 1 - 5/16 inches (34mm). Crafted from Type 303 stainless steel, it comes with a standard satin finish, giving it a sleek and elegant look. This is a well - machined stainless steel coat hook, sourced from Tech Data. The post is made of Type 303 solid machined stainless steel in a satin finish, with a 20mm (3/4') diameter and 60mm (2 - 1/4') length. It's fastened to the flange via a set screw, which also secures the flange cover. The hook pin, also Type 303 solid machined stainless steel in satin finish, has a 16mm (5/8') diameter and is integrated into the post. The flange cover, 2mm (1/16') thick and 34mm (1 - 5/16') in diameter, is also made of Type 303 solid machined stainless steel in satin finish. The concealed mounting flange, a 4mm (5/32') thick Type 303 solid machined stainless steel plate with a 34mm (1 - 5/16') diameter, has two mounting holes for wall attachment. For installation, if you're dealing with plaster or dry wall, use concealed backing to meet local building codes and secure the unit with sheet - metal screws (not included). For other wall surfaces, you can use fiber plugs, expansion shields, 3mm (1/8'') toggle bolts, or expansion bolts. If you have partitions with particle - board or solid core, use sheet - metal screws or through - bolts, nuts, and washers. For hollow - core metal partitions, use solid backing to secure the sheet - metal screws. The coat hook should be type 303 machined solid stainless steel in satin finish, with a 20mm (3/4') diameter post and an integrated 16mm diameter hook pin. The concealed mounting flange should be a 4mm (5/32') thick machined solid stainless steel plate with two screw holes for attachment, and the machined solid flange cover should be a 2mm (1/16') thick stainless steel in satin finish with a 34mm (1 - 5/16') diameter. The set screw fastens the post to the flange and secures the flange cover.



Using this Bobrick Fino coat hook is a breeze. Just hang your coats, hats, or bags on the hook pin. When it comes to installation, make sure to follow the appropriate method based on your wall type. For plaster or dry wall, add concealed backing and use sheet - metal screws. For other walls, use the recommended plugs or bolts. Don't forget, the screws are not included. As for maintenance, simply wipe it down with a soft cloth to keep the satin finish looking great. Avoid using abrasive cleaners as they may scratch the stainless steel surface. If you notice any loose parts, check the set screw and tighten it if necessary. This will ensure the post stays firmly attached to the flange and the flange cover remains secure.