Bobrick TrimLine Series. A threaded escutcheon cleverly hides the mounting plate, ensuring a tight and seamless fit against the wall. The hood is firmly attached to the bar with a set screw. This dispenser can hold standard - core sizes ranging from 3/4″ (20mm) up to 1 - 1/2″ (40mm) and is 4″ (100mm) wide. A set screw in the post acts as a deterrent against vandalism. The escutcheon has a diameter of 2″ (50mm), the overall width is 5 - 1/2″ (140mm), the height is 4 - 1/2″ (115mm), and it projects 1 - 5/8″ (35mm) from the wall without a tissue roll.
Using this Bobrick B - 546 toilet tissue dispenser is easy. First, open the hood by loosening the set screw. Then, place your standard - sized tissue roll onto the bar. Make sure the core size of the roll is between 3/4″ (20mm) and 1 - 1/2″ (40mm). Tighten the set screw to secure the hood back in place. As for maintenance, occasionally check the set screw to ensure it's tight and that the dispenser is firmly attached to the wall. If the dispenser gets dirty, use a mild cleaner to wipe it down. Keep in mind that the set screw in the post is there to prevent vandalism, so don't try to remove it unless necessary.
