Bobrick B-277 Commercial Restroom Sanitary Waste Bin, 12 Gallon, Surface-Mounted, 15-1/8 W x 23 H, 8-1/2 D, Stainless Steel

The Bobrick Contura Series waste bin is crafted from satin - finish stainless steel, offering both durability and an elegant look. It has a capacity of 12.75 gallons (48.3 - L), which is great for commercial restrooms. Measuring 15 1/8" W x 23" H x 8 1/2" D (385 x 585 x 215mm), it fits well in various spaces. The receptacle is made of 18 - 8, type - 304, 20 - gauge (1.0mm) stainless steel with all - welded construction. Its exposed surfaces have a smooth satin finish. The front of the waste bin has the same arc as other Bobrick Contura Series washroom accessories, and the side edges' radius complements them. The top edge is hemmed, and the bottom has a recessed finger grip for safe and easy handling. There are stainless steel reinforcement straps on the back to strengthen the four mounting screw holes. The bin comes with a LinerMate Trash Liner Holder. It's a molded plastic sleeve with a 20 - gauge (1.0mm) stainless steel, U - shaped support strap for safety. It makes it easy to install and remove disposable trash liners and keeps the liner inside the bin. When the unit is properly mounted, there's space between the bottom of the bin and the floor for easy floor cleaning. The LinerMate also gets rid of unsightly trash liner overhang.

Using your Bobrick B - 277 waste bin is a breeze. To insert a disposable trash liner, lift the LinerMate up and forward, and rest it over the edge of the waste receptacle front panel with the bottom notches engaged on the top front edge. Place the liner inside the LinerMate and fold it over the sleeve. Tie a knot in the corner of the bag, then put the LinerMate with the liner back into the receptacle. When it's time to empty, just gather the liner from the LinerMate sleeve and lift the bag up. For installation, mount the unit on the wall with four sheet - metal screws (not included) at the points marked with an S. If you're using plaster or dry wall, provide concealed backing as per local building codes. For other wall surfaces, use fiber plugs, expansion shields, 1/8" (3mm) toggle bolts, or expansion bolts. As for maintenance, wipe the satin - finish stainless steel surface regularly with a soft cloth to keep it looking good. Check the LinerMate and the bin's structure periodically for any signs of wear.