- Stainless steel with a satin finish
- Safe design with hemmed bottom edges
- Comes with hooks to hold a reusable vinyl liner that can be removed for servicing
- 6.4 - gallon (24.2L) capacity
- Dimensions: 14 inches wide, 18 inches high, 6 inches deep (355 x 455 x 150mm)
The trash can is crafted from 18 - 8, type - 304 stainless steel with a sleek satin finish. The front and sides are a single piece of 22 - gauge (0.8mm) steel, while the back and bottom are a one - piece 26 - gauge (0.5mm) steel. It has an all - welded construction for durability. The top edge is hemmed, and the bottom has a recessed finger grip for easy and safe handling. Four spot - welded interior hooks are provided to attach the heavy - gauge vinyl liner. The liner, which has four grommets, can be removed for servicing. When the unit is properly mounted on the wall, there's a space between the bottom of the receptacle and the floor, making floor cleaning a breeze. For installation, you need to mount the unit on the wall using four sheet - metal screws (not included). For plaster or drywall, use concealed backing to meet local building codes. For other wall surfaces, fiber plugs, expansion shields, 1/8 - inch (3mm) toggle bolts, or expansion bolts can be used. The surface - mounted waste receptacle meets the specification of being type - 304 stainless steel with all - welded construction, satin - finished exposed surfaces, and a minimum capacity of 6.4 gallons (24.2L).







Using your Bobrick B - 279 trash can is easy. First, attach the heavy - gauge vinyl liner to the four interior hooks inside the trash can. When it's time to empty the trash, simply remove the liner. To clean the floor around the trash can, it's designed with a space between the bottom and the floor when mounted on the wall. For installation, you'll need to use sheet - metal screws. Remember, if you're installing on plaster or drywall, use concealed backing as required by local building codes. For other wall types, you can use fiber plugs, expansion shields, toggle bolts, or expansion bolts. As for maintenance, regularly clean the stainless - steel body with a mild cleaner to keep its satin finish looking great. Check the liner regularly for any signs of wear and replace it when necessary. Also, make sure the hooks are in good condition to hold the liner properly.